Holiday Kickoff

Audiolab 6000A Stereo 100W Integrated Amplifier (Black)

Used Cat #3578758 • MFR #6000ABK
Print
Audiolab 6000A Stereo 100W Integrated Amplifier (Black)
This image is for illustrative purposes only
Key Features
  • 2-Channel Amplifier Configuration
  • 50W per Channel Power Output @ 8 ohms
  • ESS SABRE ES9018K2M DAC
  • Bluetooth Audio Input
Enjoy enhanced stereo sound with your favorite pair of speakers and the black Audiolab 6000A Stereo 100W Integrated Amplifier. It outputs up to 50W per channel at 8 ohms and features Bluetooth connectivity in addition to its two digital coaxial, two optical, and five stereo RCA inputs. One RCA input is a dedicated phono input and is accompanied by a ground screw terminal. An 1/8" headphone jack with discrete amplification enables private listening. The 6000A includes a remote control as an added convenience.
More Details
Used
B&H Warranty: Limited 1-Year B&H Warranty
In Stock
No Store Display
Free Delivery: Mon, Nov 23
to
Protect Your Gear
Add a protection plan from $98.95

Audiolab 6000A Overview

Enjoy enhanced stereo sound with your favorite pair of speakers and the black Audiolab 6000A Stereo 100W Integrated Amplifier. It outputs up to 50W per channel at 8 ohms and features Bluetooth connectivity in addition to its two digital coaxial, two optical, and five stereo RCA inputs. One RCA input is a dedicated phono input and is accompanied by a ground screw terminal. An 1/8" headphone jack with discrete amplification enables private listening. The 6000A includes a remote control as an added convenience.

Onboard DAC
The onboard DAC lets the 6000A play digital sources without the need for an external DAC or other additional component. The 6000A uses the ES9018 SABRE32 Reference chip family for its D/A conversion, utilizing ESS Technology's 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver low noise and high dynamic range. The amplifier has four digital inputs, three line-level analog inputs, a dedicated turntable input, Bluetooth wireless connectivity, and a dedicated headphone amplifier in addition to the speaker amplifiers.
Analog Circuitry
The discrete Class-AB power amp stage in the 6000A delivers 50W per channel into 8 ohms with a maximum current delivery of 9A into difficult loads. Its output stage uses a CFB (Complementary Feedback) topology to help ensure enhanced linearity and thermal stability, as the idle current is kept independent of the temperature of the output transistors. A 200VA toroidal transformer, followed by four 15,000 μF reservoir capacity, helps the amp maintain control of the music while enabling a wide dynamic range.
Simplified Preamp Section
The preamp section is kept simple to help maintain signal purity, with line input signals passing to the analog volume stage, which covers the range from -80 dB to 8 dB in steps of 2 dB and 1 dB; step resolution increases with volume position. The physical layout of the 6000A's circuitry is engineered to protect the preamp section from noise interference.

Audiolab 6000A Specs

Key Specs
Channels
2.0
Power Output per Channel
50 W at 8 Ohms / 1 Hz (Peak)
75 W at 4 Ohms / 1 Hz (Peak)
Rear A/V Outputs
1x Stereo RCA
Speaker I/O
2x Binding Post Pair
Bluetooth
Yes
Amplifier
Amplifier Type
Integrated Amplifier (Preamp/Power Amp Combo)
Configuration
Stereo
Power Output per Channel
Up to 50 W Max @ 8 ohms, <1% THD
Up to 75 W Max @ 4 ohms, <1% THD
Channels
2.0
Amplifier Class
Class-AB
Amplifier Class
Class-AB
Total Harmonic Distortion
<0.003% (1 kHz @ 40 W, 8 ohms)
Power Output per Channel
50 W at 8 Ohms / 1 Hz (Peak)
75 W at 4 Ohms / 1 Hz (Peak)
Frequency Response ± 3dB
20 Hz to 20 kHz
Damping Factor
Not Specified by Manufacturer
Frequency Response
20 Hz to 20 kHz ±3 dB
DAC
Model
ESS SABRE ES9018K2M
THD
< 0.003% (1 kHz, 8 Ohms, 40 W)
THD
<0.0006% (1 kHz @ 0 dBFS)
Output Level
2.05 V @ 0 dBFS, 1 kHz
Max Sampling Rate
192 kHz
Signal to Noise Ratio
>112 dB (A-Weighted)
Gain
29 dB
Connectivity
Bluetooth
Yes
Rear A/V Inputs
4x Stereo RCA
1x Stereo RCA (Phono) with Ground Screw
2x Optical TOSLINK
2x Digital Coaxial
THD
<0.01% (1 kHz, 50 mW)
Output Impedance
2.35 ohms
Rear A/V Outputs
1x Stereo RCA
Load Impedance
20 to 600 ohms
Audio Processing
Inputs
5 x Stereo RCA Pairs (1 Phono with Ground Screw)
2 x Optical TOSLINK
2 x Digital Coaxial
Output
1 x Stereo RCA
Speaker Connectors
2 x Binding Post Pairs
Other Connectors
1 x 1/8" / 3.5 mm 12 V Trigger In
1 x 1/8" / 3.5 mm 12 V Trigger Out
1 x USB Type-A (Service)
Input Impedance
Line: 10 kilohms
Phono MM: 47 kilohms / 100 pF
Input Sensitivity
Line, Volume = 0 dB: 720 mV
Phono MM, Volume = 0 dB: 3.1 mv
Max Gain
Line: 8 dB
Phono MM: 55 dB
DAC
192 kHz (ESS SABRE ES9018K2M)
Video
THD
Line: <0.0004%, 1 kHz @ 2 V, Volume = 0 dB
Max Output Voltage
2.3 V (Volume = 0 dB)
Output Impedance
120 ohms
Signal to Noise Ratio
Line, A-Weighted: >110 dB
Phono MM, A-Weighted: >76 dB
Max Output Current
9 A
Physical Specifications
Other Rear I/O
1x 1/8" / 3.5 mm (12 V Trigger) Input
1x 1/8" / 3.5 mm (12 V Trigger) Output
1x USB-A (Service)
Power Requirements
100 to 240 VAC, 50/60 Hz
Standby Power Consumption
<0.5 W
Speaker I/O
2x Binding Post Pair
Dimensions
17.5 x 2.6 x 11.8" / 445 x 65.5 x 300 mm
Weight
17.2 lb / 7.8 kg
Input Impedance
Line: 10 Kilohms
Phono (MM): 47 Kilohms
Input Sensitivity
Line: 720 mV
Phono (MM): 3.1 mV
Signal to Noise Ratio
Line: > 110 dB (A-Weighted)
Phono (MM): > 76 dB (A-Weighted)
Total Harmonic Distortion (THD)
Headphone: < 0.01% (1 kHz / 50 mW Output)
Line: < 0.0004% (1 kHz / 2 V Input)
Wireless Connectivity
Bluetooth
Yes
Power
Input Power
100 to 240 VAC, 50 / 60 Hz
Power Consumption
Standby: 0.5 W
Physical
Dimensions (W x H x D)
17.5 x 2.6 x 11.8" / 445.0 x 65.5 x 300.0 mm
Weight
17.2 lb / 7.8 kg

Audiolab 6000A Reviews

See any errors on this page?
Whatever You Need, We've Got It